Interesting facts about insulation

Insulation is an essential part of your home. Not only does it help keep the home warm during the winter, but it also plays an important part in keeping you cool during the summer. Once you start looking at the different insulation options that are available, though, the whole thing can get a bit confusing. To help you make sense of it all, here are some of the basics you need to know about home insulation.

How Insulation Works

Insulation works by providing a physical barrier to the transfer of heat through parts of the home such as the walls, ceiling and roof. Depending on the type of insulating material used, it may simply provide a barrier to heat transfer, or it could actually reflect some of the heat back in the direction it came from. In the summer, this means that heat is prevented from entering from outside; in the winter, the insulation stops heat from moving out of the house.

Understanding R-Values

Insulation effectiveness is measured by R-Value. The higher a material’s R-Value is, the more resistant it is to heat penetration. Insulations that have a higher R-Value tend to be thicker or made of denser materials able to resist greater amounts of heat transfer than thinner insulations. Some forms of insulation may have a lower R-Value but are still effective; an example is aerosol can spray foam, which can’t be placed very thick, but seals out air. So keep in mind that R-Value isn’t the only measure of how effective insulation is.

Types of Insulation

Insulation isn’t exactly a one-size-fits-all product. There are different types of insulation available to meet different needs. Though the specifics of different insulation types may vary, these are the most common types of insulation you’ll see:

Batt Insulation – This is what most people think of when they picture insulation. Batt insulation comes in rolls of material such as fiberglass or cotton that is applied in walls, floors, ceilings or other areas where large amounts of insulation is needed.

Spray Foam – As the name implies, this insulation comes in the form of a liquid foam that is sprayed onto the surface where insulation is needed. The foam expands and hardens, providing a layer of insulation that can fill gaps, cracks and other areas that other insulation types often miss.

Blown-In Insulation – Similar to spray foam insulation, blown-in insulation is applied by a blower instead of coming in rolls. Instead of originating as a liquid, however, this insulation is made of small bits of fiberglass or cellulose and fills in the area where it is blown. It provides excellent heat retention and creates a sound barrier where applied as well.

Radiant Barriers – A specialty insulation generally made of layers of perforated aluminum, this insulation is applied in the attic walls and rafters in areas with warm climates. The insulation reflects radiant energy from the sun, reducing attic temperatures and making heating and air conditioning more efficient.

Window Insulation – This can come in the form of films applied to the window surface, plastic sheeting applied over the windows or even insulation built into the windows themselves.

You may encounter other types of insulation as well, though they are typically intended for more specialty uses than those listed here.

Air Sealing

Even high-quality insulation can’t do much if there are cracks and gaps in your walls or foundation that let air flow in and out freely. Finding and filling cracks with a sealant is an important part of insulating your home. There are different sealants available for this purpose, though spray foam insulation works as both an insulator and an air sealant.

Insulation Installation

Making sense of different types of insulation and figuring out which is best for your needs isn’t always easy. Fortunately, HomeKeepr can help you find a professional installer who will match you to the best insulation for your home and seal up any air leaks as well. Sign up today for a free account so you can get to work on insulating your home.

Home comfort tips

Home automation is increasingly common these days as the number of consumer-focused smart devices continues to increase. Though automation covers everything from light controls and security systems to water leak monitors and door locks, one of the most common automation devices is the smart thermostat. These thermostats offer improved climate control and energy savings through programmable adjustments for a range of different scenarios.

There is one issue with the early smart thermostats that were introduced, however: most of them only offered a single point of climate control, not taking into account several common heating and cooling scenarios that require a bit more nuanced control. Fortunately, there are other thermostat systems now available that provide smarter climate control options.

Why a Multi-Room Approach is Important

There are a number of reasons why having a single point of temperature control isn’t always ideal. In some cases, rooms that are farther away from your unit may not get the same degree of air flow,
especially in older systems; if everything is controlled by a single thermostat located near the air intake then the rooms with lower air flow won’t get the air that they need to keep pace with the rest of the house. Similar problems can occur if you have a split system or zoned heating and cooling. It may be a cool 68 in your living room, but rooms that are served by other system components could be staying in the 70s or higher.

You Need a Multi-Room Thermostat

Regardless of the reason, if your thermostat isn’t able to consistently heat or cool your entire home then it’s not going to be nearly as efficient as you’d like. That’s where a multi-room thermostat system comes in handy. These thermostats have additional sensors that you can mount in other rooms around the house. These sensors take additional temperature readings and broadcast the data back to the thermostat. The thermostat takes this additional data and adjusts the way it heats and cools your home with a focus on maintaining the entire home’s temperature instead of just the room where the thermostat’s located.

Because the thermostat has information from all over your house, the amount of warm or cool air
circulated into each room is adjusted based on the home’s actual needs. This gives a greater amount of control over the internal temperature of the house, preventing warm and cool spots. It also ensures that adjustments made when you’re not in certain rooms or when you leave the house are optimized to save you the most money on your heating and cooling costs.

Taking Control of your Home Climate

There are a number of models of multi-room thermostats that you can choose from. The initial
installation shouldn’t be any more complicated than any other thermostat replacement, as the majority of multi-room units use wireless technology to communicate with the central thermostat. Since you don’t have to directly wire the satellite sensors you have a lot of freedom in where you place them without having to drill holes and run wires through your walls.

Once the thermostat is installed and all the sensors are in place, all that’s left is to sync the sensors with the central thermostat. How you do this may differ depending on the make and model of thermostat you choose, but each model should have detailed instructions on how to connect the units together. Once everything’s connected, all that’s left is to sit back and enjoy the controlled climate.

Need Another Opinion?

While most smart thermostats are designed to be a DIY installation, setting up a multi-room thermostat unit isn’t always easy. Whether it’s a result of confusing installation instructions or you simply don’t have the time to spare, you might find yourself wanting to call in a home automation professional to get the job done. That’s where you’re in luck: HomeKeepr’s recommendations are based on genuine referrals instead of inaccurate reviews, so you can trust that the pro you choose will be the best one for the job. Check it out now and get your new thermostat up and running in no time.

Why attic fans are important...

Keeping your house cool in the summer and warm in the winter can be expensive. Add in the cost of regular maintenance to your heating and air systems and it’s no wonder that many homeowners look for other ways to keep things cool. One increasingly popular option is the attic exhaust fan. These fans help you to circulate air through the attic eliminating the buildup of heat that attics often experience which can make your whole house seem hotter.

How do these fans work, though? Do they really save you money? Perhaps most importantly, how can you get an attic fan of your own to get rid of all of that heat your house is holding? Let’s take a look at these questions and see if an attic fan is right for you.

What Is an Attic Exhaust Fan?

As the name suggests, an attic exhaust fan is an electric fan that blows the hot air inside the attic out into the great outdoors. While many of these fans are wired into the electrical system of the house, some are solar powered so that they don’t add to your electrical usage. As the fans blow hot air out of the attic, cooler air from outside is pulled in from vents to keep the overall attic temperature lower. This air cycling also helps prevent mold and mildew that can result from moist air becoming trapped in the attic – something that’s useful both during the summer and in other parts of the year as well.

How Do Attic Fans Work?

Many attic fans are connected to a thermostat, allowing them to turn on and off when the temperature in the attic passes a set temperature. Unless the fan is installed under an eave, the outer portion of the fan generally has vent panels that open and close automatically as well based on airflow through the fan body. This allows the fan to blow without hinderance while ensuring that the fan is covered to prevent rain and pests from getting into the attic.

Another important part of the attic fan system is the series vents that allow air from outside to enter the attic. These vents are installed in the soffit and gable around your roof, allowing air to flow through the vents and into the attic space when the fan is active. Since the attic builds up heat, the air outside is typically much cooler than the air in the attic, even during the summer. This cycling of air lets cooler outdoor air enter the attic, keeping the attic space at a much more respectable temperature, so it won’t heat up the ceilings and other air in the house.

Installing Your Own Fan

Installing an attic exhaust fan is often seen as a DIY job, with homeowners making the appropriate cuts and installing the various components themselves. Since you’ll need to cut through portions of the wall or roof to install the fan, it’s definitely a project that you’ll want to double-check all of your measurements on before you dive into the work. Ensure that you schedule the job for a day when there isn’t any rain or temperature extremes in the forecast and follow all installation instructions exactly to prevent leaks or other damage.

Once your fan is installed, it’s important to check your insulation and try to locate any air leaks from within the main house itself. A well-insulated attic gives you a greater amount of temperature control, though you’ll want to make sure that you didn’t accidentally cover up your intake vents or else air won’t be able to flow from outside. Likewise, track down any cold air leaks from within the house to prevent the fan from pulling air-conditioned air up into the attic; if you don’t prevent this, your AC unit will have to work even harder as it cools more air to replace what’s being drawn up into the attic space.

Need Help with Your Attic Fan Installation?

Whether you’re not comfortable with the idea of installing your own attic fan or you just ran into some trouble along the way, HomeKeepr can help you find the professionals you need to get the job done right. Because our pros are suggested based on recommendations instead of rankings, you’ll know that you’ve got an experienced professional who can help you get your fan installed in no time.

Smart windows

Everything’s getting smarter these days. Everything. Not only are smart appliances, smart outlets, smart light bulbs and smart TVs gaining traction, smart windows are all the rage among the techy types. They can also be a really useful part of your home automation setup.

They’re not for everybody and there are differences in what various types can do, though, so pay attention and research the windows of your dreams well before you choose one for your home.

How Do You Make a Window Smart?

There are actually several different types of windows currently using the moniker “smart.” Some, like those produced by Marvin, are simply regular windows fitted with smart locks at the factory. There’s little else that they do than a traditional window doesn’t besides let you know that you left the kitchen window unlocked.

If this is a concern because you have a child that might climb out a window or a teenager known to slip out of the house that way, this might be a solution for you, but it’s hardly touching what other smart windows can do.

Some of them can generate their own electricity. Who’s smart now?

Smart Homes Made Smarter With Smarter Windows?

There are many of the mindset that we’ve all gone a little wild with the “smart” stuff in our homes. Who really needs a smart toaster? Or a microwave that you can turn on with Alexa? What’s the point of smart switches when you have a smart light bulb?

There are so many questions. But the truth is that smart windows can have a big impact on your living space and your happiness. The smart windows with lock sensors can make it easier to sleep at night, which is always great, but other smart windows can literally change the feel of the room, no matter what time of day.

Before you run out to buy yourself some fancy smart windows, keep these items in mind:

Energy efficiency is a big part of many designs. Lots of smart windows are designed to help you get the most out of your utility dollars. Many can change color based on different environmental factors, like bright sunlight or especially dark days. This way, your home stays reasonably easy to heat and cool and you can have lots of big windows without lots of big curtains.

Smart Windows can do lots of different things. The fact that a smart window can simply be a window with a smart lock or a window that changes tint to help keep your utility bills low is only the beginning. Smart windows can also double as solar panels. It’s true!

They’re not cheap, but that’s not the point. The smartest of the smart windows may come in at around $1,000, making a whole home window refit unbelievably expensive, but that’s not really the point at this time. Right now, the “cool” factor and their ability to save energy are really what buyers are getting out of these advanced windows with their connected features. Early adopters make it possible for these kinds of technologies to fall in price over time, opening up the market even wider.

For homeowners interested in smart windows that have responsive glass but terrified of their price tags, it might make sense to put the windows in rooms that get extra hot or cold (just be sure to match the style of the windows in the rest of your house), rather than doing a whole home install that can become hugely cost-prohibitive.

Looking for the Smartest Window Installers Around?

There might be smarter installers, but no one installs a smart window better than the smart window experts in the HomeKeepr community. You get all the advice you need to make the right decision and support from purchase through install and often even for the lifetime of the window. Just ask your Realtor to recommend a smart window installer for you, then give them a call. Tell ‘em HomeKeepr sent you!

5 Ways to Make Your A/C Dollars Go Further

The aqua jeweled waters of the Caribbean pared with lush, jungle-like vegetation that seems to stretch along the beach forever greet you every single summer. It’s amazing, really, and you hope that one of these days you’ll be able to turn off the Travel Channel and see them in person. But your air conditioning bill is such a killer — and ruiner of vacation plans.

There has to be a way to knock those electricity bills down while staying cool this summer. After all, the islands are calling you. Will you fill up your travel penny jar this year?

How Air Conditioners Work (The Abridged Explanation)

Air conditioners are very simple devices. They were actually invented to remove the humidity from rooms where paper was stored. It was only after they’d been in use in industry a while that anyone thought to use them for cooling.

There’s not much to these devices. Essentially you’ve got an outdoor condenser unit that works like a giant heat sink to carry heat collected from indoor air to the outside. Ultimately, the cooler that outside unit is, the more heat it can remove and the more efficiently the whole system works.

Reduce the Strain on Your A/C, Stretch Those A/C Dollars

There are plenty of ways to help your air conditioner work more efficiently short of replacing the whole system. That will increase your efficiency, but you’re going to put a lot of money into a system upgrade that may not be needed just yet.

Before you do anything rash, give these a try:

Change your filter when it’s dirty. Dirty air filters are a huge drag on efficiency. After all, the more air that can be pulled into the system at once, the faster the air in your house will cool and the less time your A/C will spend running. You’ll know your paper air filters are dirty when they change color from white to gray or brown. That’s dust and other tiny particles clogging the pores.

Another way to tackle this would be to buy an electrostatic filter. These are reusable and washable, saving lots of money on filters, as well as energy (if you keep them pretty clean).

Clean your air conditioner condenser. That outside unit is too often neglected to the point that it can affect your energy efficiency. The fins get clogged with dirt, vegetation grows around the bottom of the unit and things like blowing leaves or plastic bags get caught in and around the unit.

Throw away any trash that’s clinging to the condenser, even if it’s inside. Just make sure the unit’s off before you stick your arm in. Next, remove vegetation that’s threatening to grow into the unit, treat it with weed killer if it’s particularly aggressive. Last, get your garden hose and spray the whole condenser down using minimal pressure. Crank up the water pressure and go over it again, slowly, working from the top to the bottom. Work in sections, moving to the next one when the water coming off the condenser runs clear. You may be surprised how much dirt was hiding in those fins.

Shade your unit. Plant a tree or install a solar shade over your A/C condenser to help keep it cool on those hot summer days. The less heat already being carried by the system, the easier to expel heat from your home. Blocking direct sunlight can make a huge difference, just be sure to allow at least two feet around the unit on all sides so your condenser has plenty of air circulating around it.

Install ceiling fans. According to the U.S. Department of Energy, using properly sized ceiling fans in conjunction with your air conditioner can make 78 degrees feel just as cool as 74 degrees. Those four degrees can add up to serious cash, too. The reason this works is that ceiling fans cool people using a wind chill effect. It doesn’t change the actual temperature in the room, but it does change how it feels to you.

Hang heavy drapes. If your house has any windows that get particularly hot during the summer, you need to insulate them right away. The easiest way to do this is with heavy drapes, and the heavier the better. Make sure those curtains are closed during the hottest part of the day to prevent heat radiating into the rest of the house. To further help those windows stay cool, you can add Low-E film into the equation. When used together, heavy drapes and Low-E film will make a noticeable impact on your indoor temperatures.

Need Help Keeping Your Cool This Summer?

Saving money on your cooling bills can be serious work. Don’t worry, your HomeKeepr community is ready to help! Just log in and ask your Realtor for a recommendation. They’ll set you up with the right people to get your home ready for the summer, whether that means adding insulation, sealing all those air gaps or giving your condenser a well-deserved bath.

Spring cleaning...your A/C?

Spring is a time of beginnings. You get a chance to start over, to try something new and to get your air conditioner ready for the hot summer to come. It might not be as romantic as the budding of trees and blooming of flowers, but having your air conditioner in tip-top shape is arguably far more useful.

When you start your spring clean, don’t forget your air conditioner. In just a few minutes, you can improve its efficiency while helping it continue to run well for years to come.

First, A Basic Explanation of Air Conditioning Technology

Your air conditioner isn’t magic, but it’s pretty close. These devices were actually invented in the early 1900s as a way to reduce indoor humidity in paper plants. It just so happened they have a side effect that we rely on even today.

Air conditioning systems depend on the expansion and contraction of gasses to pull moisture out of the air by cooling it down. This is basic physics at work — warm air holds more water, cool air holds less.

When air is pulled into your air handler (for many, this is a furnace) through your warm air return, it’s forced over a tent-shaped coil that uses refrigerant to cool the air as it passes. A blower then blows that cooled air back into the house.

So What Does the Outside Condenser Do?

The air conditioning condenser that most people consider to be “the air conditioner” is actually a giant heatsink. See, when the air is cooled inside your air handler, the refrigerant is what’s absorbing most of the heat. It then gets pumped to the condenser, where the heat collected inside your house is released to the environment.

It’s really a pretty simple idea that has made a huge change to how we live, play and work.

Your Air Conditioner Spring Cleaning Checklist

There’s no time like spring to do a little air conditioner tune-up. A lot of the heavy lifting will have to be performed by HVAC professionals, but there are things you can do to keep your system running longer as a homeowner. Generally, these items should be done at least once in the spring before you start using the A/C and again in the fall when you’re ready to put it away for the year.

Change your furnace filter. Whether it’s on the ceiling, on the floor or inside your furnace or air handler, a clean filter is a filter that can let the most air through for cooling. And the easier it is for the system to pull air in and cool it, the more comfortable you’ll be with the least amount of cost. Investing in an electrostatic filter that you can wash and reuse is a smart move for the long term.

Flush your condensation line. There’s a pipe or tube that comes out of your furnace or air handler and runs to a drain somewhere. This is the condensation line. All the moisture your system is pulling out of that warm air has to go somewhere, you know? That somewhere is a pan that empties via this tube. Just open it up from the top (which tube it is should be obvious, but if you can’t find it, ask your HVAC professional), slowly pour in about a cup of vinegar or bleach. If the liquid moves, you’re gold. If not, you may need to spend some time investigating the issue. More often than not, it’s algae growth in the tube or mineral deposits, both things you can flush out, but require some patience to remove.

Clean your a-coil. That tent shaped coil mentioned above is called the “evaporator coil” or the “a-coil.” It can get dirty, which makes it a lot less efficient at removing moisture and cooling the air. If you feel brave, and you’re careful, you can wipe the coils clean or use a shop vac. They’re very similar to the coils on the back of your refrigerator, treat them the exact same way.

Comb the fins on the condenser. If you look closely at your outside condenser, you’ll notice that the part that’s inside the cage is made up of a whole bunch of teeny fins. These little guys can get damaged by accident, causing them to be less efficient because they’re not really in an optimal configuration anymore. All you need to fix this is a fin comb. This simple device lets you straighten bent fins, restoring your unit to its former glory.

Spray the condenser down. Last, but far from least, you’ll want to spray your air conditioner’s condenser down with a hose. Start by wetting all the fins with a garden sprayer, then go back around and spend some time slowly flushing out the dirt, one section at a time, working top to bottom.

Ready For An A/C Tune-Up?

If spring cleaning your air conditioner isn’t getting the results you’re looking for, it may be time to get an HVAC pro out to give it a once-over. But where can you find one that you can really trust, though? Look no further than your HomeKeepr community. Your real estate agent has already recommended their favorite home pros, all you need to do is long in and learn who makes the grade.

Smart Blinds

It seems that everything is getting smarter these days. You’ve got your basic smartphone, your smart security system, your smart speakers and even smart refrigerators. It should come as no surprise that someone managed to make window blinds that are pretty smart, too.

On first glance, these things look like one of the least useful smart products out there. When you dig a bit deeper, though, it’s clear that smart blinds, much like smart thermostats, are actually a great way to save energy and make your home safer, all while you lounge on the couch conversing with Alexa and Siri.

What are Smart Blinds?

Smart blinds, like most things that are considered “smart,” are literally window blinds that can be controlled remotely through a smartphone app, and, in this case, by the voice assistant of your choice. You can use the app to open the blinds, close the blinds or set them somewhere in between.

While this doesn’t sound like much, if you think about the regularity at which you perform these mundane tasks, having smart blinds take care of themselves is a huge time saver in the long run. But, that’s not really what’s so cool about them. Here are a few things that are, though:

They help people with disabilities. People with a variety of disabilities are benefiting from smart homes in lots of ways. When it comes to blinds, it means making it easier for everyone to let the sun shine in or to shut the blinds at night for a little privacy.

They increase safety. Whether you’re going on vacation or you’re just working late, having blinds that are able to shut on their own makes it look like someone is home, even when you’re not. It helps to deter crime, which is a good thing, for sure.
They can save energy. By cleverly orchestrating the times that your blinds are open or closed, you can help reduce the use of your HVAC system all year long. More on this later.

There are few drawbacks to having smart blinds, if you can get beyond the price point. Many manufacturers are still treating these devices as luxury buys, pushing the cost of a single blind into the hundreds of dollars.

Ikea recently announced it would be releasing its own line of basic smart blinds in the US on April 1, 2019. They’re still not in everybody’s price range, but are far more accessible with units starting around $135.

How Do Smart Blinds Save Energy?

Before you rush out to buy smart blinds because your electricity bill is out of control, keep two things in mind: first, not all blinds will perform the same or have the same features, so make sure to read the packaging or ask a knowledgeable person about those energy saving functions. Secondly, smart blinds are only as good as the person telling them what to do. So, if you don’t tweak your programs a little bit to dial in your settings, you’re not going to get great results.

Like any blind, smart blinds can be used to help reduce the strain on your HVAC system. This is done largely by blocking the sun’s rays that warm up your home. Other types of smart window treatments can act as insulators against the cold. Neither is perfect, but they do work pretty well.

When it comes to saving energy, you will have to tell the blind what you want it to do. If you want the smart blinds on the west side of your home to close entirely around 1 pm and stay closed until 4 pm, set it in the app. Some blinds, like those from MySmartBlinds, can automatically determine when to open or close, but you’ll need to enable this feature if you want your blinds to close in response to solar radiation.

Smart blinds are a great investment if you plan to stay in your house for a while. Not only are they neat and gadgety for anyone interested in the Internet of Things, they can really reduce your utility bills. It could take a while for them to pay for themselves, though — shop carefully!

Making Homes Smarter Every Day

Upgrading your home to a smarter version of itself can be tricky, but you don’t have to do it by yourself. Check out your HomeKeepr community, someone knows a smart home pro that can help you choose the right smart blinds and install them for you, too! There’s a reason that pro was recommended by so many other home pros and real estate agents — they’re just that good.

Weatherstripping Windows & Doors

o/~ “Chestnuts roasting on an open fire, Jack Frost nipping at your nose…. even though your windows are closed….” o/~

If that sounds disturbingly like your home in the middle of winter, we’ve got to talk. You may not want to admit it, but something is very wrong with your windows and doors. On cool, calm days you can’t really tell if it’s cold inside because you have the thermostat turned down a bit or if if that chilliness is cold air leaking in from your windows, but on windy days there’s no doubt.

Just looking at those windows makes you shiver. Don’t suffer needlessly from low indoor temperatures and high utility bills. Instead, do something about it! It’s time for weatherstripping.

What is Weatherstripping?

Weatherstripping is essentially any material you use to close up gaps between two surfaces of building materials located on an outside wall (generally). The act of installing weatherstripping is also commonly known as “weatherstripping,” so it can get a little confusing.

Even though it may look like your house doesn’t have any gaps between, say your window trim and the wall or the upper and lower portions of your double-hung windows, the chances are good that there are lots of small cracks you’re just not seeing. As a result, you’ll end up leaking climate controlled indoor air out into the outdoors. Sometimes this is really obvious. You’ll feel the air temperature differential or you’ll literally see bright light shining through the gaps when the room is darkened.

More often, though, you’ll find some of the gaps and miss a lot more because they can be very hard to detect. Homeowners and pros alike handle this issue in a few different ways:

They perform yearly maintenance on the weatherstripping. When you’re positive that your home isn’t leaking air, there’s not really any reason to refresh the weatherstripping or recaulk everything that is nailed to something else. But if you’re not sure of your leak status or you simply don’t think you will be able to tell where leaks are forming, spending a day laying down new beads with the caulk gun and replacing any worn weatherstripping will ensure your home is ready for the coldest and hottest days.

They take advantage of infrared camera technology. Infrared cameras are really cool. Or, at least, they can show you where things that are really cool happen to be located. Although they’re not fool-proof, if you want to give this tech a try, you can pick up a model that will attach to your smartphone for a lot less than the units the pros tend to use. When an area turns up icy blue (or another color, depending on your camera settings), you can then manually inspect that area for unexpected air flow.

They enlist the help of a energy specialist for an energy audit. Many utility companies have an energy specialist on hand to help with energy audits. Even those that don’t will keep a list of independent home pros that can perform the same service. They have all kinds of neat tools in their bags and will not only point out the drafts, but can help you deal with these and the other energy losers in your home.

You may be surprised (or even alarmed!) at how much of your home’s indoor air is leaking in from the outside and the other way around. But you can’t efficiently weatherstrip your home until you know where the leaks are, so it’s a painful, but necessary first step Again, if you’re just really in love with the caulk gun, a refresh never hurt anything, but you probably have other things you’d like to be doing.

Do You Need an Energy Audit?

While you can perform a sort of DIY energy audit on your own, if you want a detailed analysis of where the weather is getting in, plus all the other hints and tips for saving energy that come with a formal energy audit, you don’t have to look any further than your HomeKeepr community! Your real estate agent has already made the connections with the best home pros in the area, their experiences and recommendation can save you a lot of headaches in the long run.