Why attic fans are important...

Keeping your house cool in the summer and warm in the winter can be expensive. Add in the cost of regular maintenance to your heating and air systems and it’s no wonder that many homeowners look for other ways to keep things cool. One increasingly popular option is the attic exhaust fan. These fans help you to circulate air through the attic eliminating the buildup of heat that attics often experience which can make your whole house seem hotter.

How do these fans work, though? Do they really save you money? Perhaps most importantly, how can you get an attic fan of your own to get rid of all of that heat your house is holding? Let’s take a look at these questions and see if an attic fan is right for you.

What Is an Attic Exhaust Fan?

As the name suggests, an attic exhaust fan is an electric fan that blows the hot air inside the attic out into the great outdoors. While many of these fans are wired into the electrical system of the house, some are solar powered so that they don’t add to your electrical usage. As the fans blow hot air out of the attic, cooler air from outside is pulled in from vents to keep the overall attic temperature lower. This air cycling also helps prevent mold and mildew that can result from moist air becoming trapped in the attic – something that’s useful both during the summer and in other parts of the year as well.

How Do Attic Fans Work?

Many attic fans are connected to a thermostat, allowing them to turn on and off when the temperature in the attic passes a set temperature. Unless the fan is installed under an eave, the outer portion of the fan generally has vent panels that open and close automatically as well based on airflow through the fan body. This allows the fan to blow without hinderance while ensuring that the fan is covered to prevent rain and pests from getting into the attic.

Another important part of the attic fan system is the series vents that allow air from outside to enter the attic. These vents are installed in the soffit and gable around your roof, allowing air to flow through the vents and into the attic space when the fan is active. Since the attic builds up heat, the air outside is typically much cooler than the air in the attic, even during the summer. This cycling of air lets cooler outdoor air enter the attic, keeping the attic space at a much more respectable temperature, so it won’t heat up the ceilings and other air in the house.

Installing Your Own Fan

Installing an attic exhaust fan is often seen as a DIY job, with homeowners making the appropriate cuts and installing the various components themselves. Since you’ll need to cut through portions of the wall or roof to install the fan, it’s definitely a project that you’ll want to double-check all of your measurements on before you dive into the work. Ensure that you schedule the job for a day when there isn’t any rain or temperature extremes in the forecast and follow all installation instructions exactly to prevent leaks or other damage.

Once your fan is installed, it’s important to check your insulation and try to locate any air leaks from within the main house itself. A well-insulated attic gives you a greater amount of temperature control, though you’ll want to make sure that you didn’t accidentally cover up your intake vents or else air won’t be able to flow from outside. Likewise, track down any cold air leaks from within the house to prevent the fan from pulling air-conditioned air up into the attic; if you don’t prevent this, your AC unit will have to work even harder as it cools more air to replace what’s being drawn up into the attic space.

Need Help with Your Attic Fan Installation?

Whether you’re not comfortable with the idea of installing your own attic fan or you just ran into some trouble along the way, HomeKeepr can help you find the professionals you need to get the job done right. Because our pros are suggested based on recommendations instead of rankings, you’ll know that you’ve got an experienced professional who can help you get your fan installed in no time.

July Steve & Jack's Home News

Dear Steve & Brigid,

Welcome to summer...both officially and unofficially!! Not only has this been the coolest summer I can ever remember, but it has also been the wettest! Here is to a lot more sunshine and warmer temps! We hope your summer is off to a great start, and if you have kids, we hope you are keeping them busy and not having to hear the dreaded, 'Mom/Dad, I'm bored' comment.

We have some very exciting news to share!! We have two new additions to our team!! Thea Charnas is our new buyer specialist and she fills the opening created when Julia Hayes moved on from the team. Thea is from Cleveland and has experience in the medical field. She obtained her license in 2018 and came on board last month. She jumped in with both feet and has already been a huge help working with buyers finding them their dream home. If you attended Happy Hour this month, you were able to meet her as well as our other new team member.

Our other new team member is Patti Sircy. She is our Director of Marketing. She is responsible for all of our marketing for our listings as well as for the team. She is a Navy veteran and managed several clothing stores among other jobs over the years. Patti will be taking a huge load off of Kylie's plate so she can focus on transaction management.

Check out our new team photo here.

Kylie is super-happy to have more help in the office. She just returned from a week trip to Disney and Sea World with her family a couple of weeks ago and had an amazing time including behind-the-scenes tours of the penguins and dolphins. While we missed her, she deserved every minute of that vacation!

Steve and his family are about to depart on a dream vacation next week. Ana leaves on Monday with the Indianapolis Children's Choir for Germany. They will board a river boat and cruise the Danube River for a week and will see parts of Germany, Austria, and Budapest and will have several spots where they will perform. She is very excited! Steve, Brigid, & Tali leave on Wednesday for Salzburg, Germany and will spend a few days there and then will head to Munich for a few days and pick up Ana and then head to Athens, Greece to see some of the sights and finally will board a private ship to sail throughout the Greek isles for a week. This has been planned for a few years and they cannot wait to go! Don't worry!! If you have a real estate need, our team is on stand-by waiting to help you!

Jack and Mary Anne are planning a trip to Greece in the coming months and are anxious to hear how Steve's trip went.

Onto the real estate market. As you probably know by now, we have been on one of the longest bull market runs in history. The market is finally showing some signs of cooling as houses stay on the market a bit longer and the list price to sales price gap is widening a bit and we are seeing some signs of price stability, which is a welcome sign for buyers and their agents!!! Most houses under $250,000 are still flying off the market in literally hours with multiple offers. Higher-priced houses are staying on the market quite a bit longer as they compete significantly more with new construction.

Check out the May 2019 vs. May 2018 market stats courtesy of MIBOR:

Median Sales Price-UP 5.7% to $185,000
Closed Sales-DOWN 3.0% to 12,731 units
New Listings-DOWN 1.6% to 17,291 units
Pending Sales-DOWN 1.7% to 15,522 units
Days on Market-DOWN 10.9% to 49 days
Price/s.f.-UP 5.8% to $109
Percent of Asking Price Received-DOWN 0.3% to 97.5%
Active Inventory-UP 5.2% to 5,162 units
Absorption Rate-UP 6.7% to 1.5 months

We are still in an unhealthy sellers' market, but we are seeing signs of that shifting. If you are thinking of selling, NOW is the time to do so before the market shifts. Please give us a call so we can talk specifically about your situation and consult with you about your options. Worried you will sell your house too fast and not have anywhere to go? We have a solution for that!! Give us a call to learn more-317-573-1880.

Thank you to everyone who attended our Happy Hour last week!! We had a great time and look forward to seeing you next month.

**Please note, due to Steve's vacation, July Happy Hour is moved back a week to July 25th from 5-6:30PM at Matt The Miller's in Carmel. Please come join us and enjoy drinks and appetizers on us. Always a great time!!!

Click here to read the July newsletter

Click here to read/watch what clients are saying about us. New videos!!! Tell us what you think!!

Click here to access coupons and discounts at places you shop every day. Why pay full price??

Click here to learn about what is happening in real estate in a 1-minute video

Click here to read about our Senior Advantage Program

Click here to read about our New Construction Program

Click here to download the most powerful real estate app available to search every home

Are you or someone you care about thinking about buying, selling, or building a new home? Give us a call today so we can help you/them through the complicated process-317-573-1880.

Your Friends in Real Estate,

Steve, Kylie, Thea, & Patti

What do you know about air filters??

Air filtration is an important part of your home’s ventilation system. Without an air filter in place, dust and other airborne particles would be distributed throughout your ductwork. This could aggravate allergies, build up on your vents to reduce airflow and possibly even create bigger problems over time.

This doesn’t mean that you can just grab any air filter and slap it in place, of course. Choosing the right air filter for your home is important if you want to get the most life out of your heating and cooling system. Stop for a moment and think about your HVAC system; do you really know what sort of air filter you need to keep things running in top condition? If you don’t, here’s what you need to know.

Where Is My Air Filter?

The first thing that you need to know about your air filter is exactly where in your house it’s located. This may seem kind of obvious, but some air filters are difficult to find. While the most common air filter location is behind a grate on one of the walls, some of these grates are in odd locations or are designed to somewhat blend in with the look of the surrounding wall. Filters may also be placed in the air handler unit (AHU) or rooftop unit (RTU). Buildings with split ventilation systems may even have multiple intakes that each have their own air filter. Depending on how your system is designed, it may take a bit of hunting to locate your filter.

Choosing an Air Filter

Once you’ve located your filter, it’s important that you choose the right one for your needs. Part of this involves finding the right size filter; different HVAC units are designed for different filters, and if you get one that doesn’t fit then you’re going to have trouble getting it (or keeping it) in place. Measure the dimensions of the area where the filter is mounted or look at the old filter and find the dimensions listed on it. Choosing an air filter is about more than just finding the right size, however; one other big consideration is the MERV rating (which stands for Minimum Efficiency Reporting Value.)

The MERV is a number that tells how good of a filter you’re buying. A low MERV of around 6 provides you with 35 to 50 percent efficiency at capturing large particles like dust, mold and pet dander. A MERV of 8 increases this to over 70 percent efficiency, capturing those particles as well as slightly smaller particles like pollen and dust mites. A MERV of 11 captures large particles with a greater than 85 percent efficiency, as well as medium particles like those found in auto exhaust with 65 to 80 percent efficiency. You can even go higher than that, with a MERV of 13 capturing large and medium particles with over 90 percent efficiency and small particles like smoke, bacteria and even odors with up to 75 percent efficiency.

There are other options available as well, such as HEPA filters (which you might hear referred to as high-efficiency particulate arrestance filters or high-efficiency particular air filters) that have an even higher standard of particle removal. HEPA filters must remove either 99.95 percent (in Europe) or 99.97 percent (in the United States) of all particles of size “small” or larger. Depending on the filter, this translates to a MERV value of around 17 to 20.

Air Filter Maintenance

There’s more to keeping your system running well than just installing a filter, of course. Most air filters should be changed monthly, though some may have different recommended use periods that should be listed on the packaging. Periodic cleaning of grates and vents may also be required to keep the filters clean and the system running efficiently. Failing to change your filters can reduce airflow and system efficiency, and over time, it can even reduce the life of your unit.

Need Some Help?

If you’re worried that you can’t find your filters or that you won’t be able to pick the filter that best meets your needs, we’ve got your back. HomeKeepr can help you find the HVAC pro who’ll keep your system running in top shape and ensure that you have the filters that best meet your needs.

Drywall anchor secrets revealed!

Whether you’re hanging a picture or mounting a television, anything that goes on your wall needs something to anchor it in place. If there’s a stud in the wall that you can attach it to then you’re fine; you’ve got well-supported wood to drive a screw into which will hold whatever you’re mounting in place. If you can’t find a stud where you need one, though, you could have a problem. That’s where drywall anchors come in.

What Is a Drywall Anchor?

Drywall anchors are small pieces that are slightly larger than the screws you’re using on a project. Depending on the type of anchor you’re using it might be made of plastic or metal, with small fins sticking out from the outside of the anchor body and a hole in the middle that runs the length of the anchor. The anchors go into the wall, then your screw goes into the hole. As you screw it in, the screw digs into the anchor body in much the same way it would with wood to ensure that the screw won’t slip out.

Anchors are designed to provide a tight fit for your screws. As the screw goes in, the anchor is forced to spread out and open up a bit. This pushes the body of the anchor against the sides of the hole you put it in, causing those little fins to dig into the surrounding drywall. The fins are positioned to go in easy but resist coming out, giving you a solid mounting even though there isn’t any wood or other solid material for your screws to secure to.

Plastic Anchors

There are multiple types of drywall anchors. Choosing the right one for the job you’re working on helps to reduce unnecessary damage to your drywall and ensures that the mounting is strong enough for the load it needs to bear. To ensure that you have the right drywall anchor for what you need to support, try to get an estimate of the weight of the load and check the packaging of different drywall anchors to find an anchor that can hold that much weight.

If you have a relatively light load, you’ll probably need a plastic anchor. The most common of these are known as expansion anchors and are essentially plastic sleeves that you hammer into a drilled hole and that simply spread out as you insert a screw. There are also threaded plastic anchors that look like oversized screws; they work similarly, except you screw them into place instead of hammering them. Regardless of the type of plastic anchor you use, the purpose is still to dig into the drywall and hold a screw in place.

Metal Anchors

For heavier loads you’ll likely wind up with a metal anchor. Though you may see some threaded metal anchors, the most common metal anchors are known as molly bolts and feature a metal sleeve with a screw already inserted into them. You hammer these into place as you would with an expansion anchor, then remove the screw. Once you’re ready to mount you place the screw back into the anchor and start tightening; this causes a portion of the metal sleeve to pull toward the screw, expanding metal arms on the other side of the drywall to create a much more secure fitting.

If you have an even heavier load, you’ll need to use a toggle bolt instead. These anchors consist of a metal bolt with foldable metal wings that the bolt screws into. You have to fold the wings so that they lie over the bolt, then insert them into a hole large enough that they can fit through to the other side. Once on the other side the wings will expand, preventing the bolt from coming back out. Make sure that there is a washer or something else that’s large enough to cover the hole, though, or the bolt head could slip through the hole and you’ll lose your toggle bolt into the wall.

When Drywall Anchors Fail

In most cases, if a drywall anchor fails then it simply wasn’t the right type of anchor for the job. Trying to use smaller or weaker anchors for heavier loads will often result in failure because they simply don’t achieve enough grip on the surrounding material to hold the load. In some cases, though, the drywall itself may be too weak or the anchor you use may have been intended for a different material. Be sure to match the anchor to the weight and the material to minimize your chances of anchor failure.

Are you still having problems finding the right drywall anchors to meet your needs? Don’t risk your photos or collectables… the HomeKeepr community is here to help with any issues you might have. Find the answers you need or locate a pro who can get everything secured safely in record time. Best of all, they all come recommended by other members of the community so you won’t have to worry about hard-to-trust reviews again!

Robots cutting your grass...

Robotics and automation have changed the way that a number of things work in the home. You may not realize that you can automate tasks outside of the home as well. Though they have not received as much attention as home automation sensors and digital assistants, robotic lawn mowers are starting to change the way that people approach lawn care. Modern robotic lawn mowers were introduced only in recent years, but the devices have a longer history than you might think.

Introducing the MowBot

Believe it or not, the first robotic lawn mower was actually created and patented in 1969. Dubbed the MowBot, the robotic device was self-propelled and capable of making random turns within an area defined by a signal wire that was used to create a boundary. Though the battery-powered device was primitive compared to today’s robotic lawn mowers, the approach it took to lawn maintenance wasn’t that far off from how today’s devices work. It had some staying power as well, as MowBot Inc. is still producing robotic mowers today that are more modern takes on the original MowBot functionality.

The Modern Robotic Lawn Mower

While robots like the MowBot persisted since the 1960s, it wasn’t until the 1990s that the more modern style of robotic lawn mowers began to emerge. A solar-powered mower was developed in 1995 by Husqvarna, and this was followed in the next 10 years by other niche robotic lawn mower designs. Smaller-scale robotic mower releases occurred in the United States and the UK in 2000, but it wasn’t until 2005 that the first widespread commercial release of a robotic lawn mower occurred. Interestingly, these mowers used the same sort of signal wire that the MowBot had combined with a few more modern features.

The market has taken off in the time since then, with a variety of solar-powered and self-charging robotic mowers hitting the market with innovations such as programmability, autonomous obstacle avoidance and even the ability to program or control the mower remotely from a smartphone or similar device. Some modern robotic mowers are even designed to only trim a small section of the grass blades at a time, opting instead to mow more frequently (often without any input from their owners) to keep the lawn in optimal shape.

Benefits of Robotic Lawn Mowers

Robotic lawn mowers offer a number of benefits over traditional push mowers or riding lawn mowers. A few of the benefits of these mowers include:

Electric-powered robotic mowers reduce fuel costs and carbon emissions

Smaller, more frequent cuts prevent excessive strain on your lawn that could result in browning or other damage

Lightweight units that use random movements while cutting the lawn prevent damage caused by mowing in the same pattern repeatedly

Electric units with smaller motors significantly reduce noise pollution while cutting

The mulching action of robotic lawn mowers recycles clippings to feed your lawn throughout the year

Other benefits of using a robotic lawn mower include increased free time, more consistent lawn heights and the elimination of the dangers of injury created by the traditional lawn mower.

Rise of the Robots

Though once a niche market, robotic lawn mowers have seen a massive surge in popularity in recent years. Models can range in price from $400 to $3,500 or more, with higher-end models offering greater coverage and more programmability features. Robotic lawn mower sales are growing at a faster rate than sales of traditional mowers, with analysts believing that robotic mower sales will continue to increase by approximately 11 percent each year through 2024. As new mowers are designed and related technologies such as home automation develops, sales rates could increase even more.

Driveway repairs

Sometimes it’s easy to make a mountain out of a molehill. Other times, like when your driveway is starting to show some wear, you might instead try to make a crack out of a canyon. It’s not that you don’t want to make a driveway repair, but often it’s hard to know when the time is just right. So, how can a homeowner know for sure?

Wear and Tear on a Driveway is Normal

It’s not unusual to see a few small cracks or pits in the surface of your driveway as it ages. Asphalt, especially, pits, cracks, heaves, alligators and buckles. Cement, on the other hand, mostly just cracks. Other types, like specialty driveways made from bricks or pavers are best to always be assessed by a professional, so it might not be a bad idea to have one out yearly.

For the rest, you can probably tell when it’s getting close to time to dress the drive up again.

But it’s not just a cosmetic improvement, repairing your driveway stabilizes the pavement or slab itself in many cases. Asphalt is much more plastic than cement, so unless the cracks are small in your cement drive, expect a big job.

Asphalt can often be restored from a sad shape, so long as most of the surface is intact and it’s not badly buckled.

When to Patch and Repair Asphalt Driveways

Choose a warm day when it’s going to be dry for a bit. Also, make sure you can move your vehicle elsewhere, either to the street or to a neighbor’s driveway for the next two days so the new sealant can dry. You should evaluate it yearly, but anticipate only really needing repairs every three to five if you’re dedicated to preventing water damage to the surface with proper use of gutters and other precipitation diverters.

Between resealing, patches and repairs, scrub the surface regularly with mild dish soap and warm water to help keep your driveway at its best. It should look slick and black and maybe even a little bit shiny. When it starts to look more dried out, keep an eye out for other changes or plan to reseal it in the very near future. A nice black driveway always looks its best, anyway.

Repairing and Patching Cement Driveways

Cement driveways are a bit of a different story. Some cracks can be sealed by a homeowner with simple tools, others cannot. It’s not always clear how extensive the damage is when you’re experiencing extensive cracking or have areas that are no longer flush with the rest of the surface, so this is definitely a job for an experienced handyman or driveway expert.

There are several interesting new technologies that are being used to lift cement pads back into place with materials like polyurethane foam. It’s really something to see! Although not available everywhere, the technology can salvage some driveways that would otherwise have to be busted out, hauled off and repoured, a process that can be a real headache.

You can clean your cement driveway with a power washer if you know how to use one very delicately so that you don’t remove the thin surface coat. Otherwise a driveway brush, mild detergent and a hose will do the trick for regular cleanings.

When in Doubt, Call a Pro

There are a lot of parts of your property that leave lots of room for error. Your driveway isn’t one of them. If you have any doubts about your ability to evaluate, repair, replace or even handle the materials required to do so, call in a pro. But where do you find one?

Just check your HomeKeepr community! Your Realtor already knows the best companies in town for your driveway type and can recommend them to you with a click of a button. Your HomeKeepr community always has your back, often from your back pocket!

Confidence and security come from inexpensive driveway inspections, and HomeKeeper is the best place in town to find the team for the job.

How to keep kitchen appliances clean...

When the next bowl of chili explodes all over the inside of the microwave or you finally give in to the inch thick layer of pizza burn off inside your oven, this page of advice for cleaning household appliances will be right here waiting for you.

Common Appliances and How to Clean Them

For some people, cleaning is as natural as walking and breathing. But for the rest of us, it takes effort and probably some knowledge that we’re currently lacking. After all, it’s not such a big deal to clean a microwave, but for some reason it feels like it takes forever. Without further ado, here’s how to clean basically everything useful in your kitchen.

Microwave

Pre-prep Work: Put a coffee mug or small bowl full of water and slices of lemon in the center and run the microwave on high for about three minutes, or until the liquid is turning to steam. This will help soften food splatter and the lemon smells nice. You can also use other citrus fruits or forego it entirely and use a drop of dish soap.

Break It Down: Take out the turntable and anything else that will come loose. Toss these parts in the dishwasher and run it. Or wait if you have other stuff to stick in there and make it a full load.

The Nitty Gritty: Wipe down the walls of the microwave with a sponge, cloth or several paper towels, plus your favorite dish soap and water or all purpose cleaner. There’s not really a wrong way to clean a microwave. Wipe the outside while you’re at it, especially the buttons.

Garbage Disposal

Pre-prep Work: Unless you have a clog, there’s not much in the way of prep work to do. Flick the switch, run some cold water to make sure there’s not any food left in the device.

Break It Down: Some garbage disposals, like Insinkerators, have removable baffles (the black part that’s just inside the drain). If yours is removable, take it out. If not, then move along.

The Nitty Gritty: Cleaning a garbage disposal is really easy. Just clean your removable baffle, if present, and toss some citrus fruit inside. Most garbage disposals no longer use blades (don’t stick your hand in to find out unless the breaker is turned off), so the ice cube trick does nothing, but citrus is still a big deal. If it’s really smelly, drop some liquid dish soap inside and run the water until the bubbles stop.

Dishwasher

Pre-prep Work: Running an empty load with a measuring cup full of vinegar or bleach can help start the process off right. These chemicals help eliminate chronic smells, you’ll be really happy you did. DO NOT USE DISH SOAP.

Break It Down: Remove the racks and anything else that comes loose, like cutlery baskets. Take those to the shower and wait for further instructions.

The Nitty Gritty: First clean any screens that might be protecting food grinders or other moving parts. You can just wipe that out. Next, there’s such a thing as dishwasher cleaner. Your life will be immeasurably easier if you just buy a few of these and use as directed to clean the inside of the dishwasher.

Last, go find those racks you put in the shower. Spray them down with a removable shower head or take your chances with the regular kind. If they’re very dirty, give them a going over with soapy water and a sponge. Go slide those bad boys back into the machine. Wipe the outside.

Refrigerator

Pre-prep Work: Put food into a prepared cooler and turn the ice maker off.

Break It Down: Pull out all the shelves and drawers at once and place them in or near the sink.

The Nitty Gritty: Start with the empty fridge cavity and wipe everything down, from the top to the bottom. Warm, soapy water is fine for most residue, tough grime can be knocked out with all-surface cleaner. Next, do the door interiors.

Now wash the shelves and drawers and leave them to dry. Once all of that is complete, put the fridge back together and repeat with the freezer. Change your water filter and turn the ice maker back on when you’re done. Wipe the fridge outside down last.

Freestanding Range (this also applies to cooktops and ovens that exist independently)

Pre-prep Work: Smooth top ranges just need their tops wiped down. Turn the pilot lights off on gas ranges.

Break It Down: Pull knobs, remove grates, pull coils and catch pans, as applies to your stove.

The Nitty Gritty: If you have a stove with a self-cleaning oven, find your manual and figure out how to use it. Most will lock themselves, heat until they’re super hot and you only have to wipe the racks down and get the ash (there’s never much) out of the bottom. This will take a few hours. Maybe several hours. But it’ll be super clean.

For the top, wipe the bit that’s not removable down with soapy water. Grab the coils and set them aside and put the rest in the dishwasher. No reason to work too hard. Glass top stoves sometimes need harder cleaning. There’s a gritty glass top stove cleaner available commercially.

Put it all back together like you found it. Good work!

You Could Clean Your Own Appliances, Or….

You could find a great cleaning service in your HomeKeepr community. Just log on, ask your real estate agent for a recommendation and choose from the home pros that are sent your way. You’ll never have to worry about cleaning appliances again when you have a cleaning service handy. Recommendations are better than reviews, come and see the difference!

Finishing your basement??

More people are choosing to stay in their existing home, expanding into unused space rather than going through the trouble of selling and buying again. If you’re in the same position, it might make sense to expand your living space by finishing your basement. The good news is that since the structure is already there, a basement remodel can be accomplished by a homeowner with limited construction knowledge.

Serious Considerations Before Starting Your Finishing Project

Basements are interesting spaces because at least some part of them are underground, holding back tons of soil and rocks. The fact that they don’t collapse inward is a testament to the engineering involved. Even though the basement concept is brilliantly designed, depending on the age of your home, other issues can quickly turn your project into a gaping hole for money to disappear into.

Before you even start picking out materials, check that the moisture level is low enough to not ruin the materials you’re going to be using. Make a rough check for both seeping water from walls and humidity inside the basement with 24 inch by 24 inch squares of heavy clear plastic sheeting. Tape them to the walls in random spots, then wait two weeks. If there’s water between the plastic and the wall, you’ve got an unsealed foundation. If the water is only on top in the form of condensation, you need a dehumidifier stat.

If there’s either kind of moisture present, you’ll also want to choose materials that can tolerate some amount of exposure to water, just in case your sealing and dehumidifying fail you.

1… 2….3…. GO!

It’s time to get that remodel started. Don’t get too far ahead of yourself, though. Keep these five tips in mind as you go through the process.

It takes the time it takes. It may seem like your basement remodel is dragging on and on, but remember that you’re creating an entirely new livable floor in your home. This is no small thing. Take your time, don’t cut any corners or else you’ll find yourself fixing those things you thought were unnecessary the first go. Remember that excellent prep work is where you’ll spend most of your time during any construction job.

Check for and clean up damage first. Bugs, rot and mold are all enemies of good basement remodels. Sure, you can cover them up, but that means that you’re covering up ongoing damage. You need to get a pest inspector out, they can help you determine if there are bugs or rot. Mildew and mold are more apparent, most aren’t dangerous, but they do indicate active moisture issues. Regardless of the issue, you need to fix it now.

Remember that your furnace needs to breathe. Furnaces and water heaters need plenty of room air in order to properly combust to generate heat. Even though electric furnaces and water heaters don’t necessarily need oxygen, they definitely need space so home pros can get around them to work. When you plan your new basement layout, keep this in mind. Adding a door with a vent to a utility closet will also help with those gas appliances.

Create trapdoors for access. Once all those utilities are sealed behind the wall and inside the ceiling, you can’t get to them without causing major damage. This is why it’s so important that you keep shutoffs, important electrical junctions and other utility access points accessible. You can make these access doors blend into the design of your basement or make them extremely obvious, depending on what works best for you.

Plan for the worst. Your basement is dry and has never been wet, but with record setting rains in many areas of the country, it’s a good idea to use materials that can survive minor flooding. Instead of using laminated plank flooring, for example, choose tile because it doesn’t matter if it does flood. If you have room for an emergency sump pump, have one installed to protect your investment.

When you’re planning to refinish your basement, there are lots of things to keep in mind. Check and double check your plans, just to be sure that they’ll work well with the space you have to use. It’s a huge job, but if you’re well-organized and patient, it should be no problem at all.

Tired of Waiting for Your Basement to Finish Itself?

Check out your HomeKeepr network, it’s full of home pros that do remodeling and finishing jobs all the time. Your Realtor can recommend their favorite home pros to you through the app, speeding up the process of trying to figure out what home pro is the best match for your project. Reviews have nothing on recommendations, come on by the HomeKeepr community today for the pros you need.

Tips to make gardening easier.

If the idea of getting up early on Saturday morning to commune with your landscape is an idea that you cherish, but don’t dare pursue because of the high level of maintenance required, you may be surprised to find out that a perfect garden doesn’t always require backbreaking labor or gallons of water to keep it alive. In fact, there are lots of ways to make gardening easier and increase the time you have to spend glancing at your pert little petunias.

Gardening Doesn’t Have to Be Hard to Be Rewarding

Keeping a garden used to be a massive labor of love, with a huge emphasis on the labor part. But people have been keeping some kind of plant life semi-domesticated since the dawn of human evolution. And, since the dawn of evolution, we’ve been trying to make the process easier and more productive. Whether you’re growing fountain grass or exotic herbs, there’s something on this list that’ll improve your gardening experience:

Sprinklers. The old standby for greener lawns everywhere, sprinklers can be used in other situations, too. For example, if it’s a nice sunny day and the risk of water standing on leaves is small, use one to water your vegetable garden plot. You can also help young trees and shrubs get a good start by sprinkling them gently every warm, dry day.

Drip irrigation. Sprinklers are great for big areas, but what do you do when you just want to water a few specific plants? Drip irrigation is the answer you seek. You can use these systems with basic timers or upgrade to a much more sophisticated system that will let you slowly drip water at the base of plants that don’t like water on their leaves or otherwise need individual care.

Native plants. There’s no such thing as a plant that needs zero attention, but native plants come pretty close. Instead of having to fret over special care for plants that are delicate in your area, choose the ones that have spent generations evolving there. For prairie dwellers, native grasses are a great start; those in the desert can do some pretty incredible things with barrel cactus and dramatic succulents. Visit your local nursery or ask your landscaper what plants are native to your area.

Containers. From pots on the patio railing to gutters loaded down with strawberries, containers make gardening so much easier. You can start with the perfect soil mix, ensuring that drainage isn’t a problem, then add a little fertilizer and your favorite plants. Now you just have to water and watch those babies grow.

Vertical gardens. Plants in and on the ground tend to end up in a mess — especially if those plants are vines! Vertical gardening isn’t limited to these twining climbers, you can also hang levels of containers, allowing you lots of extra space for growing things. Like with any containers, you are totally in control of the environment, but vertical gardening minimizes bending and kneeling. Win-win.

Want to Know The Easiest Way to Garden?

Hire a landscaper from those recommended to you by your real estate agent in the HomeKeeper community! You can also be connected to home pros that install sprinklers, groom your lawn, or even help you divert greywater to landscaping. The sky’s the limit in your garden once you get to know the clever folks recommended by agents and pros alike in the HomeKeepr community.